|
|
PressureHow can I
test for water pressure in my home?
How can I test for water pressure in my home? Household pressure can easily be tested with a pressure gauge. You can purchase a pressure gauge at most hardware stores. You can also call the district office and arrange for someone to come out and test your water pressure. Back to Top A pressure regulator is a mechanical valve which reduces high water pressure to lower pressure. Most pressure regulators are located directly outside your home in order to control the amount of pressure you have in your home. Back to Top Why is a pressure regulator necessary? In many areas of the district, the mainline pressure (80-150 psi--pounds per square inch) is too high for the plumbing within the residence. The pressure regulator will reduce the pressure to a range of 50-60 psi which is adequate for most homes. Back to Top Will PID adjust or replace my pressure regulator? No. A plumber should be called for the service or the homeowner can perform this task if they have the knowledge or skill. Back to Top Who do I need to contact if my pressure is too high or too low? If you have any question about your water pressure, please contact the district office and request a pressure check. District personnel will check the pressure and advise the customer of any appropriate action. Back to Top What is the ideal pressure for my home? 50-60 psi is adequate and safe for most indoor plumbing. Back to Top Is the pressure outside my home, the same as inside my home? No. In most areas, main pressure can be higher than what is considered safe and normal for inside the residence. Back to Top What are some common causes for low pressure?
Back to Top What are some common causes for high pressure?
Back to Top How do I find out if my sprinkler system will be operational with the amount of pressure in my area? If a new system is going in, district personnel can take a pressure check, which is needed in the sizing formula. If it is an old system, a landscaping company or a sprinkler supply outlet may be able to help. Back to Top What can I do to resolve my pressure problem? Some problems can be taken care of by the homeowner, If unable or in doubt, call a plumber. Back to Top What does low pressure have to do with my fire protection? Some areas of the district have inadequate pressure and/or mainline size for fire protection. Adequate fire flows are determined by the fire department. Back to Top What are my alternatives for adequate fire protection?
Back to Top |
| ||||||||||||||||
